USEFUL INFORMATION FOR A CORRECT USE OF REV BROACHING TOOL (for machines that do not have the y axis)*  - Lubricate the bushing (2) to favour its rotation useful to allow the correction of the prospective symmetry errors;
- Insert the tool (1) into the eccentric bushing (2) and house the both of them inside the boring bar holder;
- Make sure that the flat-head fixing bolts (5) have the part that fastens the tool perfectly intact. If possible use new flat-head bolts;
- If you want to use a spherical-head screw with spring (4) consider that this is nor functional for the centring neither for the fixing of the tool; its aim is to make the tool hold a steady position during the rotation of the bushing;
- When it's possible use the internal adduction;
- For other information about programs and working parameters enter upon our website and click on "INSTRUCTIONS";
- Look at these videos:
http://www.youtube.com/watch?v=JZ5ipzfQs0U&feature=fvsr
http://www.youtube.com/watch?v=0gzlKq1BOFA&feature=channel - For further information, requests or explanations don't hesitate on getting in touch with us.
* The eccentric bushing functions as a y axis and it has a movement range of ± 0.5 on y axis that is sufficient to remove the symmetry errors. For the machines that have the y axis the REV BROACHING TOOL has to be mounted directly inside the boring bar holder. An advise:
We suggest to enlarge a hole already present on the boring bar holder operating a borehole M16x1,50 perfectly aligned with the axis. In this way the threaded dowel M16x1,50 is offering a large bearing surface and, therefore, the tool is going to be perfectly aligned to the ideal axis. F.P. OFFICINA MECCANICA SRL
Phone. +39-059/8570329
Fax. +39-059/8578480
info@brocciatura.it
http://www.brocciatura.com/ | 
هیچ نظری موجود نیست:
ارسال یک نظر